4. While holding the unlock button, press and release the lock (centre Mini logo) button 3 times, within 10 seconds. 5. After the third press release both buttons and the doors should lock and then unlock. 6. If you have another key to program, start at step 3 (by pressing both buttons). 7. 4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van. 5. Remove the clips that attach to the lock and to the window controls (these can be a pain) 5. (Optional) Remove the bracket that held the window/lock control module. Bibliography. Central locking is an electrical door locking mechanism that enables drivers to secure every door in their vehicle from one device, usually an electric key fob. This system has been I've heard of this working occasionally, but you might have to get it reprogrammed. EDIT: Just looked it up, here's how to do it: Put the key in the ignition, turn the key to the "accessory position", and hold the unlock button for at least 5 seconds. This should do the trick. Using removal tools, remove your door panel and door lock cluster panel. Loosen all clips, remove all screws, and bend the panel away from the door. Remove any plastic cover, keeping it intact enough to reseal later. Locate and remove your lock screws and door lock actuator bolts before disconnecting the black electrical connector and removing TKWGB.

central locking not working